Jump to content

Burdekin Bridge

Coordinates: 19°38′25″S 147°23′41″E / 19.6404°S 147.3946°E / -19.6404; 147.3946 (Burdekin Bridge)
From Wikipedia, the free encyclopedia
(Redirected from Burdekin bridge)

Burdekin Bridge
Burdekin Bridge
Coordinates19°38′25″S 147°23′41″E / 19.6404°S 147.3946°E / -19.6404; 147.3946 (Burdekin Bridge)
Carries(1) Bruce Highway
Motor vehicles, Railway
CrossesBurdekin River
Localebetween the towns of Ayr and Home Hill, Queensland, Australia
Other name(s)Burdekin River Bridge or the Silver Link
Preceded byInkerman Bridge
Characteristics
DesignTruss bridge
MaterialSteel
Total length
  • Total - 3,620 feet (1,103 m)
  • Main spans - 2,500 feet (762.0 m)[1]
  • Approaches - 3 + 8
Longest span250 feet (76.2 m)
No. of spans10 main spans and 22 approach spans[2]
Piers in water9
History
DesignerHarry Lowe, Noel Ullman, Bill Hansen
Construction startApril 1947
Construction end1957
Opened27 March 1957[3][4][5]
Statistics
Daily traffic7000
TollNo
Location
Map

The Burdekin Bridge (known as the Burdekin River Bridge or Silver Link)[6] spans the Burdekin River between the towns of Ayr (locality of McDesme) to the north and Home Hill to the south, both in the Shire of Burdekin, Queensland, Australia. Located on the Bruce Highway which is part of Highway 1, it is an important link in the national road network. It is a road-rail bridge which provides high flood immunity link between north and south Queensland.[1]

The Bridge was completed in 1957. Construction began 10 years earlier in 1947.[7] At 3,620 feet (1,103 m) in length, it is one of the longest multi-span bridges in Australia and longer than Brisbane's Story Bridge or New South Wales's Hawkesbury River Railway Bridge. It is 46 metres shorter than Sydney's Harbour Bridge.[1][8] It is the only bridge in Australia to be built on sand.[6]

History

[edit]
Aerial photograph of Burdekin Bridge construction site showing piers with Railway Bridge in foreground c 1952
Official opening of Burdekin Bridge, 15 June 1957, as seen from the Ayr/McDesme side of the river

Prior to the construction of the high-level Burdekin Bridge, there were two low-level bridges over the Burdekin River, one for road and one for rail. These bridges were frequently impassable due to flooding of the river.[5] Remnants of the old rail bridge can be seen immediately downstream of the present bridge.[9][10]

Originally, it was thought that the bridge could not be built in its present location. No trace of rock could be found on which to build the bridge foundations. In 1946, two high-ranking Government engineers visited India to inspect a number of bridges built on sand foundations. The same technique was used for the Burdekin Bridge and it is the only bridge in Australia not built with a firm foothold.

Rail and road sections from the Home Hill side, 1963

The bridge rests on 11 huge, hollow, concrete caissons sunk into the river bed. The caissons are 17 metres across the top (measured parallel to the stream) and vary in width from 5.5 to 7.6 metres. The caissons were sunk into the river bed to a depth of about 30 metres. Add to that the approximately 20 metres that the caissons rise above the bed and the result is some very massive pieces of concrete. Each weighs about 4,000 tons. The caissons were fitted with steel "cutting edges" to help them sink. The steel used in the cutting edges weighed 238 tons.

Construction of the first caisson started in 1947 after the "wet season". As each caisson rose in height, sand was removed from the centre of the caisson to make it sink into the sand bed. To get such a tremendous mass to sink gradually and evenly was difficult. To add to the difficulties, often a caisson became stuck and a diver had to be sent down to find the problem and remedy it. Another difficulty was that each caisson had to be sunk to a secure depth before the "wet season". If a caisson was not firmly anchored deep enough, a flood could have swept it away.

Because the bridge does not have rock foundations but is entirely supported by sand, it is sometimes described as a floating bridge. It is not a true floating bridge as it does not float on water.

The metal bridge spans were bolted together with high-tensile bolts instead of being riveted. At the time, no other Australian bridge had ever been constructed this way.

With all the difficulties, plus the shortage of steel after World War II, the construction took almost a decade to complete at a cost of $6 million. The bridge officially opened on 27 March 1957.[11] Despite these setbacks, the new bridge greatly assisted in travel between Ayr, Queensland and Home Hill, Queensland and formed a vital link between North and South Queensland.

The Silver Link replaced the Inkerman Bridge which is set just above the river bed. It was regularly covered and washed away by flood waters but it is still possible to see the remains of the old bridge when the river level is low.

Due to the special construction of the bridge, with steel beams forming a truss over the highway, it is regularly being closed to let pass oversize loads which take both lanes on the narrow bridge.

In October 2010, the Burdekin Bridge was recognised as a National Engineering Heritage Landmark.[6][5]

A 5-year bridge maintenance and rehabilitation project had commenced in 2013. It is the first major structural rehabilitation work undertaken since the bridge construction.[1] This maintenance and rehabilitation program is continuing in July 2022, with an expected total cost of $96.9 million.[12]

Engineering heritage

[edit]

The bridge was listed as an Engineering Heritage National Landmark by Engineers Australia as part of its Engineering Heritage Recognition Program.[13]

See also

[edit]

References

[edit]
  1. ^ a b c d "Burdekin River Bridge: maintenance and rehabilitation project". Department of Transport and Main Roads, Queensland. Archived from the original on 22 September 2010. Retrieved 19 October 2010.
  2. ^ "BIG UNDERTAKING". The Proserpine Guardian. Vol. 42, no. 2837. Queensland, Australia. 14 February 1947. p. 1. Archived from the original on 19 July 2022. Retrieved 19 November 2016 – via National Library of Australia.
  3. ^ "News and Notes From the N.R.M.A." The St. George Call. Vol. 53, no. 16. New South Wales, Australia. 18 April 1957. p. 6. Archived from the original on 19 July 2022. Retrieved 14 October 2017 – via National Library of Australia.
  4. ^ "Burdekin Bridge". Burdekin Shire Council. Archived from the original on 15 October 2017. Retrieved 14 October 2017.
  5. ^ a b c Wensley, Penelope (5 October 2010). "Engineering Heritage National Landmark Award to the Burdekin River Bridge". Government House, Queensland. Archived from the original on 27 February 2014. Retrieved 7 September 2015.
  6. ^ a b c Lawson, Catherine (7 November 2013). "Highway One: the mighty Burdekin River". Australian Geographic. Archived from the original on 25 October 2021. Retrieved 25 October 2021.
  7. ^ "BURDEKIN BRIDGE". Bowen Independent. Vol. 44, no. 4211. Queensland, Australia. 4 April 1947. p. 4. Archived from the original on 19 July 2022. Retrieved 19 November 2016 – via National Library of Australia.
  8. ^ "Burdekin River Bridge maintenance" (PDF). Main Roads. Archived from the original (PDF) on 10 March 2016. Retrieved 15 October 2017.
  9. ^ "Burdekin River Bridge". Tourism & Events Queensland. Queensland Government. Archived from the original on 15 January 2021. Retrieved 13 January 2021.
  10. ^ "A Home (Hill) and an Ayr Away from Home ..." (PDF). Queensland Rail. Archived (PDF) from the original on 30 March 2016. Retrieved 13 January 2021.
  11. ^ "NEW QUEENSLAND BRIDGE". Western Herald. New South Wales, Australia. 19 April 1957. p. 4. Archived from the original on 13 January 2021. Retrieved 14 January 2021 – via National Library of Australia.
  12. ^ "Burdekin River Bridge: maintenance and rehabilitation program". Queensland Government. 15 July 2022. Retrieved 26 July 2022.
  13. ^ "Burdekin River Bridge, Bruce Highway, 1947-". Engineers Australia. Archived from the original on 13 March 2022. Retrieved 27 April 2020.

Further reading

[edit]
[edit]